Color: Red, Size: 0.2mm – Upgrade Pet Bed For Creality K1 K1 Max K1C Ender-3 S1 Pro Magnetic Plate Ender-5 S1 Reality Bed Reality K1 Bulid Plate Pei Sheet

Product detail:

Size: 235x235mm
Print Instructions:

1. When first time printing, keep the built sheet smoothing (the nozzle and the hot bed distance adjust to A4 paper thickness).

2. Tear off the adhesive on the base of the magnetic sticker and stick it on the hot bed platform, pay attention to be flat and do not leave air bubbles.

3. Adsorb the PEI side or the PET side spring steel plate on the magnetic base.

4. we suggested printing temperature: PLA 60℃ PETG 70-80℃ ABS 90-100℃.

Start printing in PET and PEO sheet, the temperature of the hot bed can be set to 40°C-80°C according to the actual situation (PEO/PET do not exceed 80°C).

PEI sheet can be work in 160°C~180°C for a long period of time, PEI can not over 200°C.

5. Take off the sheet from printing surface and bend the sheet slightly, you can easy to take the model.

Note 1:

DO NOT USE ACETONE ON POWDER COATED PEI SIDE!!!!

Note 2:

PET,PEO and PEI must be used with the magnetic base.

If you are going to buy a product without magnetic base,

please make sure you already have a magnetic base.

Package including:

1 Set Spring Steel Sheet pre-applied Sheet + without Magnetic Plate.